• 0332-5284828, 051-4427778
  • info@universalfireprotection.com.pk

Viking Valves & Systems

Wet Pipe Systems

Model E-1 / F-1 EasyRiser® Swing Check Valve & Trim

011189The Viking Easy Riser® Swing Check Valve is a general purpose rubber-faced check valve approved for use in fire service systems. The valve is for use in wet system risers, preaction system risers and wherever a check valve with a drain connection and gauge connections can be utilized. When used with a flow switch on wet pipe systems not requiring a mechanical alarm, the Easy Riser® Swing Check Valve may replace an alarm check valve.

Technical Data Sheets

————————————————————————–

Model J-1 Alarm Check Valve

The Viking Model J-1 Alarm Check Valve serves as a check valve by trapping pressurized water above the clapper and preventing reverse flow from sprinkler piping. The valve is designed to initiate an alarm during a sustained flow of water (such as the flow required by an open sprinkler) by operating an optional water motor alarm and/or alarm pressure switch.

Technical Data Sheets

————————————————————————–

Alarm Check Valve Vertical Trim (Model J-1)


Technical Data Sheets

————————————————————————–

Alarm Check Valve Horizontal Trim (Model J-1)


Technical Data Sheets

————————————————————————–

Model F-1 Dry Valve

The Viking Model F-1 Dry Pipe Valve is a latching differential valve used to separate the water supply from the dry pipe sprinkler system. The valve combines a positive latching clapper and air plate assembly, with a differential air to water seat design. The latching clapper and air plate assembly provides a positive mechanical seal for the air pressure in the dry pipe system.


Technical Data Sheets

———————————————————————–

Model F-2 Dry Valve

The Viking Model F-2 Dry Pipe Valve is a latching differential valve used to separate the water supply from the dry pipe sprinkler system. The valve combines a positive latching clapper and air plate assembly, with a differential air to water seat design. The latching clapper and air plate assembly provides a positive mechanical seal for the air pressure in the dry pipe system.

Technical Data Sheets

———————————————————————–

Dry Valve Trim (Model F)

Technical Data Sheet

Technical Data Sheets

More Information: Visit Universal Fire Protection

Rate this post

Do you want To Buy It?