• 051-4427778, 0332-5284828
  • info@universalfireprotection.com.pk
c-tek

Product Overview:

The size, durability and flexibility of the range makes it ideal for use in
all types of commercial and residential property including small shops,
factories, schools, warehouses, offices and houses in multiple occupation.
Often referred to as ‘the installer’s choice’, easy-to-follow wiring
instructions are printed adjacent to the terminals of all variants and a
lift-off lid guarantees an easy first fix and straightforward maintenance.
The panel’s broad compatibility with virtually all known smoke and heat
detector ranges and its ability to interpret a short circuit in any zone(s)
as a fire or fault condition make it particularly useful for retro-installations.

[zionhost_shortcodes_bullet_points]

Standard Features:

C-TEC’s FP Range of conventional fire alarm control panels is one of the most robust andcost-effective available.Fully compliant with BS 5839 part 4, the range encompasses no less than ten different variants, covering 1 to 14 zones.

  • Fully compliant with BS 5839 Part 4
    Lift-off lid for easy first fix and maintenance
    Attractive easy-to-clean polycarbonate front label
    Heavy-duty base connections
    Robust metal lid and metal back box
    Ultra-bright, long-life LED indicators
    Built-in 24V power supply and battery charger
    Optional head removal facility for compliance
    with BS 5839 Part 1
  • Short circuit = fire facility (pre-1980 BS, no
    resistors in call points), selectable on a zone by
    zone basis for retro-installations
    True battery monitoring circuit
    One man walk test and zone isolate facility
    (not available on EFP1)
    Ancillary connections for repeater panels and
    other system add- including fault relay
    modules, fire relay modules, sounder delay
    relay modules, sounder extender kits, etc
    (not available on EFP1)
Technical Specifications
Mains supply 230V 50/60Hz..
Internal power supply 27V nominal..
Total output current limited to 800mA @ 230V.
Quiescent current 40mA
Max battery size and type 2 x 12V 2.3Ah VRLA connected in series
No. of detector zone circuits (Max. length per circuit is 500m).
Call point resistor value 470 to 680Ω
Max. devices per detector zone 20 detectors
No. of conventional sounder circuits 2 (Max. length per circuit is 500m).
EOL resistor value 6800Ω 5% Tol. 0/25W (blue, grey, red, gold).
Max. sounder output current 800mA (to all outputs). Outputs are fused at 1A.
Weight 4.3kg.