ADDRESSABLE BEAM TYPE SMOKE DETECTOR...

ADDRESSABLE BEAM TYPE SMOKE DETECTOR

ML-1170 MAXLOGIC INTELLIGENT ANALOGUE ADDRESSABLES BEAM TYPE SMOKE DETECTOR

Maxlogic Addressable Beam Type Smoke Detector consists of 2 parts as a receiver and a transmitter. The detector works on the principle of light obscuration. The photosensitive element sees light, produced by the transmitter unit, in normal conditions. A preset sensitivity level is based on a percentage of total obscuration by the calibration of the transmitter unit. It gives a fault signal if this percentage of total obscuration is less than or equal to the determined alarm level. It gives a fault signal or a fire alarm, depending on the user’s choice, if there is more than 90% sudden obstructiveness of the light.

PRODUCT FEATURES

• 5-100 meter operating distance
• 1500 m2 area can be protected
• Compatible with EN 54-12
• Faults are monitored by 2-digit screens, with easy commissioning
• LED indicators for operating, fault, and fire conditions
• Drift compensation
• The installer doesn’t need to wait for the detector to stabilize after installation.
• Microprocessor controlled

LED Indicators;

POWER: Shows the power status.
FIRE: Shows the fire alarm status.
FAULT: Shows the fault status

TECHNICAL SPECIFICATIONS

Operation Environment	Close Area
Detection Principles	Light Blocking
Operation Distance	5-100 meter
Alarm Levels	%25
Alarm Response Time	6-8 seconds
Largest Angular Error	0,5°
Operation Voltage	20V – 30V DC
Quiescent current	50 mA
Alarm Current	60 mA
Operating Temperature	(-10°C) ± (+55°C)
Maximum Humidity	95 (non- condensing)
Dimensions	160 x 192 x 109 mm
Weight	Receiver: 830 gr, Transmitter: 800 gr.
Color	White
Cable	1x2x0,8+0,8JH(st)H) /(1x2x1,0+1,0JH(st)H) /(1x2x1,5+1,5JH(st)H)

ACCESSORIES AND OPTIONS

ML-1171	Maxlogic intelligent analogue addressable beam type smoke detector, Receiver
ML-1172	Maxlogic intelligent analogue addressable beam type smoke detector, Transmitter

CABLE CONNECTIONS

Transmitter Connections

Receiver Connection