Asenware is a well-reputed company because of its products in the design and manufacturing of advanced alarm systems and fire alarm control panels. Asenware conventional fire alarm system is designed with items that are very reliable and user-friendly. Conventional fire alarm system provides necessary protection in building different ranges and complications.

But Universal Fire Protection in Islamabad, Karachi, and Lahore provides the products of the Asenware Conventional  Fire alarm system. The products include Different types and models. 

1 . Photoelectric Smoke Detector

The Asenware Photoelectric Smoke detector is an important factor in a Conventional fire alarm System to reveal the presence of smoke in the environment. Asenware detector also detects the presence of smoke particles. When light enters the detection chamber, the smoke detector scatters the light onto the sensitive sensor due to the internal LED and activates the alarm.

• AW – CSD381

Asenware conventional fire alarm system has a double sensor for fire detection that provides the advantage of photoelectric smoke detection and heat detection. The operational voltage is 9 to 28 VDC. Asenware conventional fire alarm system is installed in residential, commercial and industrial places.

• AW – CSD311

This model of Asenware conventional fire alarm system also has dual sensing technologies, a photoelectric sensor for detecting smoke, and a heat sensor for detecting temperature. In addition, the specification of voltage is between 9V to 30V. During operation, the utilization would be around 30 to 50mA.

• AW – CSD812

The main function of this model Asenware conventional fire alarm system is to detect fire and smoke by using detectors and activating an alarm. The voltage capacity is 24VDC. However, the Asenware device has a digital display with a flash and buzzer to show each Zone. The operating temperature is typically in the range of 0°to 50°. The utilization power relies on the number of detectors and devices but is generally around 100mA to 500mA.

2 . Heat Detector

Heat detectors fall into two categories ; rate of rise and fixed temperature detectors. When a fire is occurs anywhere the burning of material could generate a large amount of heat and in this way increase the temperature of the environment. If the temperature increases in an area by a specific rate it will trigger an alarm.

The Asenware conventional fire alarm system visualized the temperature. The operational voltage rate is 24VDC and the current consumption is 10mA to 30mA that is depending on the design and heat detector. Universal Fire Protection provides different models of heat detectors with specifications and excellent quality.

• AW-CTD382 

Asenware conventional fire alarm system which is very helpful for fire safety. But the general battery voltage is 12VDC or 24VDC and the power consumption range is between 10 to 20W. Heat detector is used in Fire alarm systems to detect and monitor fire environments.

• AW-CTD321

The AW-CTD321 model is used as a fire alarm system for detecting the temperature. These heat detectors operate within a voltage  12VDC or 24DVC  and the power supply is commonly 10mA to 30mA. It is installed in areas where the smoke detectors are not suitable like kitchen garages where high dust and smoke.

• AW-CTD322

Asenware designed this model with operating efficiency. It has a specification with a different range. This heat detector has a typical voltage range of 24V DC. Furthermore, the system generally uses 3 – 10W in standby mode during alarm conditions and use in commercial, residential, industrial, and public buildings.

3 . Standalone Smoke Detector

Standalone smoke detector is a key feature Of Asenware conventional fire alarm systems. The standalone detector works as a safety device designed to detect temperature variations associated with a fire and operates independently of a fire alarm control panel. It may not be integrated into a larger fire detection system. People generally install this device in areas where smoke detectors are not suitable, such as kitchens, garages, or industrial settings. Smoke detectors are cost-effective and generally installed in smaller places.

Types of Standalone detectors

• Standalone detector AW-SSD602

Asenware fire alarm system that is manufactured to monitor temperature changes in an environment. The typical voltage range is 9V to 30V DC and the power consumption is 5 – 20mA.In addition, this is used in various environments where an excess temperature indicates a fire condition. On the other hand, Some common applications such as commercial and residential buildings and elevator shafts.

• Smoke detector AW-SSD603

Asenware smoke detector that is used in safety applications. This model has a Voltage range of 9V – 30V DC. This detector draws minimal current, often in the range of ≤ 20 m which is standard for low-power standalone detectors. Moreover, you can install it in data centers or server rooms.

• AW-SSD701

This device is designed to detect the heat changes in the environment which may indicate a fire or other disaster system. The voltage of this model is 9V DC or 12V DC. Some models are designed 24V DC for larger systems, commonly installed in industrial or commercial places. In addition, this model has a low power, generally in the range of a few milliamps.

• Smoke detector AW-SSD701-AB

The heat-sensitive detector manufactured for fire detection with a wide voltage range is 9V DC -30V DC power supply and low power requirements which is less than 10mA. However, the detectors primarily used for detecting temperature increases caused by fires. People use this detector of Asenware conventional fire alarm system in warehouses, storage areas, Safety compliance, homes, or small buildings.

4 . LPG gas Detector

The LPG gas detector is a safety equipment that is designed to detect the presence of liquified petroleum gas in the air.Asenware detectors are commonly used in commercial residential and industrial settings to prevent hazards such as gas leaks which could lead to explosions or fire. Because the operating voltage for AC is 90V – 270V and DC is 9 – 28V. Universal Fire Protection provides the LPG gas detector and also its models at affordable rates.

• AW-CGD2166

The Asenware conventional fire alarm system is used to detect the liquified petroleum gas in the environment. The typical voltage range is 5VDC. Whereas, the power consumption is around ＜150mA at 5V DC. people use this model in kitchens, homes, factories, and any space where LPG is used or stored.

• AW-CRP2166

This model detects the presence of petroleum liquid gas in the environment and is typically installed in areas where LPG is stored. Such as in Kitchens, homes and industrial places. on the other hand, The fire alarm system provides a guide for early leaks of gas. The voltage range is 12VDC or 24VDC depending on the model.

Manual call point AW-CMC2166-5

The manual call point function is to sign in an alarm in a fire emergency. The voltage range of this model is 12V DC to 24V DC. Therefore, the average current is usually less than 5mA in standby mode. This Asenware conventional fire alarm system has a top-notch solution.

Manual call point AW-CMC 2166-6

 The manual call point AW-CMC2166-6 has an essential factor that allows it to activate the fire alarm in case of a fire emergency. This model’s of Asenware conventional fire alarm system operating voltage range is 24VDC. Furthermore, the power current is in the range of 10 to 20mA in standby mode but increases in value during the triggering alarm.

Fire Bell AW – CBL2166

The Asenware fire bell activates alarms during emergency conditions. The bell runs at a voltage rate of 24V DC. These Fire Bells run with a working current of 50mA andl are commonly used in public and industrial buildings.

Horn Strobe

This alarm system analyse fire and serves as a protection device fix in builings. Hornstrobe is a key form of fire alarm system that operates on a zone-based detection methodology. The Horn Strobe has also different models with specific voltage and working currents.

• AW – CSS2166 – 2
• AW – CSS2166 – 4
• AW – CSS2166 – 5

Flash Light

The Flashlight is a dual-type device in the Asenware conventional fire alarm system. It acts as both a visual and auditory alerting device installed in fire alarm and emergency warning system In addition, It has a flashing light and a loud audible alarm. As a result, the strobe flashes bright light to provide an alert in noisy environments.

Entrance indicator

The entrance indicator is an important feature of Asenware conventional fire alarm system. It alerts the people about the presence of fire at the entrance and exit of buildings. The indicator provides an early alert to those areas where fire risks and ensures their safety.

Our Conventional Fire Alarm System come with 2-32 zone conventional fire alarm control panel. Alarm transmission wiring, communications, signaling, alarm reset, silence power indicating LEDs and more. They have different fire zones to monitor a specific area of a building and detect a fire break out.

&lt;p>Each fire detection zone in our conventional fire alarm system has many controlling devices such as automatic heat/smoke detectors, manual fire alarm call points, sounders and beacons. In the case of a detection of a fire either manually or automatically, the fire alarm control panel will actively operate to create an alarm.</p></p&gt; <p>
Download File

Conventional Fire Alarm System

<h3>Conventional Fire Alarm System Panel Menvier MF200 2 Zone & MF400 4 Zone</h3> <p>The Menvier MF200 & MF400 range of conventional control panels offer a competitive solution for smaller installations.
>Batteries offering 24 hours standby as standard
Supports: 20 detectors per zone can be connected.
>Number of Alarm Lines 2
End of Line Devices Detection circuits: resistor AND Alarm lines: resistor
2 zone Panel Battery 24 V, end of line devices Resistor
Competitive Price</p&gt;</h3>

Conventional Fire Alarm System Detectors

Detectors: Smoke, Temperature, Heat

conventional detectors have been specifically designed to operate with Menvier Fire Alarm control panels.
Heat detectors MMT860, MHT890 will detect temperatures above 77ºC and 92ºC.
Heat detector MFR830 is used to detect rapid increases in temperature with a maximum of 60ºC

Conventional Fire Alarm System Callpoints

Callpoint the MBG914 which can be either surface or flush mounted. The MBG917 which is a weatherproof version. <br />This attractively designed, Easy to install,
range of callpoints have been specifically developed.
>To be compatible with Menvier conventional fire panels. <br />Quick and Easy install
Callpoint Fast fit clip on front cover
Testing key Single tool for test and access</p&amp;gt;</p>

Conventional Fire Alarm System Bells</h3> <p>Quick and Easy to install
High Quality sound output
Low current consumption
Multi-fixing base plate internal
IP54 rated Weatherproof
This type fire alarm bile used for other alarm system</p&gt;</p&gt;</h3>

<h3>Safety Signs and Emergency Lighting

<p>we provide full range safety and security sign stainless steel. Plastic safety signs includes; BT Red care, emergency
lighting, leak detection, security and signage
ns8-emergency-light-Islamabad-in-Pakistan</p></p&gt;

NS8 Emergency Light Menvier

Menvier emergency light ns8 1X8W