Asenware is a well-reputed company because of its products in the design and manufacturing of advanced alarm systems and fire alarm control panels. Asenware conventional fire alarm system is designed with items that are very reliable and user-friendly. Conventional fire alarm system provides necessary protection in building different ranges and complications.

But Universal Fire Protection in Islamabad, Karachi, and Lahore provides the products of the Asenware Conventional  Fire alarm system. The products include Different types and models. 

1 . Photoelectric Smoke Detector

The Asenware Photoelectric Smoke detector is an important factor in a Conventional fire alarm System to reveal the presence of smoke in the environment. Asenware detector also detects the presence of smoke particles. When light enters the detection chamber, the smoke detector scatters the light onto the sensitive sensor due to the internal LED and activates the alarm.

• AW – CSD381

Asenware conventional fire alarm system has a double sensor for fire detection that provides the advantage of photoelectric smoke detection and heat detection. The operational voltage is 9 to 28 VDC. Asenware conventional fire alarm system is installed in residential, commercial and industrial places.

• AW – CSD311

This model of Asenware conventional fire alarm system also has dual sensing technologies, a photoelectric sensor for detecting smoke, and a heat sensor for detecting temperature. In addition, the specification of voltage is between 9V to 30V. During operation, the utilization would be around 30 to 50mA.

• AW – CSD812

The main function of this model Asenware conventional fire alarm system is to detect fire and smoke by using detectors and activating an alarm. The voltage capacity is 24VDC. However, the Asenware device has a digital display with a flash and buzzer to show each Zone. The operating temperature is typically in the range of 0°to 50°. The utilization power relies on the number of detectors and devices but is generally around 100mA to 500mA.

2 . Heat Detector

Heat detectors fall into two categories ; rate of rise and fixed temperature detectors. When a fire is occurs anywhere the burning of material could generate a large amount of heat and in this way increase the temperature of the environment. If the temperature increases in an area by a specific rate it will trigger an alarm.

The Asenware conventional fire alarm system visualized the temperature. The operational voltage rate is 24VDC and the current consumption is 10mA to 30mA that is depending on the design and heat detector. Universal Fire Protection provides different models of heat detectors with specifications and excellent quality.

• AW-CTD382 

Asenware conventional fire alarm system which is very helpful for fire safety. But the general battery voltage is 12VDC or 24VDC and the power consumption range is between 10 to 20W. Heat detector is used in Fire alarm systems to detect and monitor fire environments.

• AW-CTD321

The AW-CTD321 model is used as a fire alarm system for detecting the temperature. These heat detectors operate within a voltage  12VDC or 24DVC  and the power supply is commonly 10mA to 30mA. It is installed in areas where the smoke detectors are not suitable like kitchen garages where high dust and smoke.

• AW-CTD322

Asenware designed this model with operating efficiency. It has a specification with a different range. This heat detector has a typical voltage range of 24V DC. Furthermore, the system generally uses 3 – 10W in standby mode during alarm conditions and use in commercial, residential, industrial, and public buildings.

3 . Standalone Smoke Detector

Standalone smoke detector is a key feature Of Asenware conventional fire alarm systems. The standalone detector works as a safety device designed to detect temperature variations associated with a fire and operates independently of a fire alarm control panel. It may not be integrated into a larger fire detection system. People generally install this device in areas where smoke detectors are not suitable, such as kitchens, garages, or industrial settings. Smoke detectors are cost-effective and generally installed in smaller places.

Types of Standalone detectors

• Standalone detector AW-SSD602

Asenware fire alarm system that is manufactured to monitor temperature changes in an environment. The typical voltage range is 9V to 30V DC and the power consumption is 5 – 20mA.In addition, this is used in various environments where an excess temperature indicates a fire condition. On the other hand, Some common applications such as commercial and residential buildings and elevator shafts.

• Smoke detector AW-SSD603

Asenware smoke detector that is used in safety applications. This model has a Voltage range of 9V – 30V DC. This detector draws minimal current, often in the range of ≤ 20 m which is standard for low-power standalone detectors. Moreover, you can install it in data centers or server rooms.

• AW-SSD701

This device is designed to detect the heat changes in the environment which may indicate a fire or other disaster system. The voltage of this model is 9V DC or 12V DC. Some models are designed 24V DC for larger systems, commonly installed in industrial or commercial places. In addition, this model has a low power, generally in the range of a few milliamps.

• Smoke detector AW-SSD701-AB

The heat-sensitive detector manufactured for fire detection with a wide voltage range is 9V DC -30V DC power supply and low power requirements which is less than 10mA. However, the detectors primarily used for detecting temperature increases caused by fires. People use this detector of Asenware conventional fire alarm system in warehouses, storage areas, Safety compliance, homes, or small buildings.

4 . LPG gas Detector

The LPG gas detector is a safety equipment that is designed to detect the presence of liquified petroleum gas in the air.Asenware detectors are commonly used in commercial residential and industrial settings to prevent hazards such as gas leaks which could lead to explosions or fire. Because the operating voltage for AC is 90V – 270V and DC is 9 – 28V. Universal Fire Protection provides the LPG gas detector and also its models at affordable rates.

• AW-CGD2166

The Asenware conventional fire alarm system is used to detect the liquified petroleum gas in the environment. The typical voltage range is 5VDC. Whereas, the power consumption is around ＜150mA at 5V DC. people use this model in kitchens, homes, factories, and any space where LPG is used or stored.

• AW-CRP2166

This model detects the presence of petroleum liquid gas in the environment and is typically installed in areas where LPG is stored. Such as in Kitchens, homes and industrial places. on the other hand, The fire alarm system provides a guide for early leaks of gas. The voltage range is 12VDC or 24VDC depending on the model.

Manual call point AW-CMC2166-5

The manual call point function is to sign in an alarm in a fire emergency. The voltage range of this model is 12V DC to 24V DC. Therefore, the average current is usually less than 5mA in standby mode. This Asenware conventional fire alarm system has a top-notch solution.

Manual call point AW-CMC 2166-6

 The manual call point AW-CMC2166-6 has an essential factor that allows it to activate the fire alarm in case of a fire emergency. This model’s of Asenware conventional fire alarm system operating voltage range is 24VDC. Furthermore, the power current is in the range of 10 to 20mA in standby mode but increases in value during the triggering alarm.

Fire Bell AW – CBL2166

The Asenware fire bell activates alarms during emergency conditions. The bell runs at a voltage rate of 24V DC. These Fire Bells run with a working current of 50mA andl are commonly used in public and industrial buildings.

Horn Strobe

This alarm system analyse fire and serves as a protection device fix in builings. Hornstrobe is a key form of fire alarm system that operates on a zone-based detection methodology. The Horn Strobe has also different models with specific voltage and working currents.

• AW – CSS2166 – 2
• AW – CSS2166 – 4
• AW – CSS2166 – 5

Flash Light

The Flashlight is a dual-type device in the Asenware conventional fire alarm system. It acts as both a visual and auditory alerting device installed in fire alarm and emergency warning system In addition, It has a flashing light and a loud audible alarm. As a result, the strobe flashes bright light to provide an alert in noisy environments.

Entrance indicator

The entrance indicator is an important feature of Asenware conventional fire alarm system. It alerts the people about the presence of fire at the entrance and exit of buildings. The indicator provides an early alert to those areas where fire risks and ensures their safety.

Multi-Criteria Detector 

Introduction to the Product Multi-Criteria Detector

The Multi-Criteria Detector is a smart fire litter device designed to protect your home and your workplace safe. It can also sense heat, flames, and harmful gases. It does not just detect smoke. This advanced detector. It’s very easy to set up and works quietly in the background, and requires minimal maintenance, making it an ideal choice for everyday safety. That means it can warn you faster than a regular detector, giving you extra time to stay safe. Whether it’s your home, office, or a bigger workplace, this device detects danger early.

Key Features and Specifications: Multi-Criteria Detector

Key Features:

• Multi-Sensor Technology: Detects smoke, heat, flames, and toxic gases.
  
  
• Early Warning System: Alerts you faster than normal detectors for extra safety.
  
  
• Low Maintenance: Designed for everyday use without again and again upkeep.
  
  
• Compact and Modern Design: Fits easily in homes, offices, and industrial spaces.
  
  
• Quiet Operation: Works silently in the background until danger arises.
  
  
• Energy Efficient: Minimal power while providing maximum safety.

 Specifications 

• Low Profile – 1.8″ high (with base)
• 2-wire base compatibility, relay bases available
• 135°F Fixed Temperature heat sensor (Latching)
• Heat sensor protected by a built-in guard
• Highly stable operation, RF/Transient protection
• Low standby current. 451,!A at 24VDC
• Two built-in power/sensitivity supervision/alarm LEDs
• Removable smoke labyrinth for cleaning or replacement
• Automatic Sensitivity window verification function meets outlined requirements in NFPA 72, Chapter 2 & 7, Inspection, Testing, and Maintenance

How to Use the Multi-Criteria Detector

• Installation:
  Pick a good spot on the ceiling or wall, away from corners, fans, or dusty areas. Use the bolt or mounting bracket that came with it to fix it in place.
• Power On:
  Turn the device on by connecting it to batteries or plugging it into the power. Look for a small light (LED) to make sure it’s working.
• Test the Alarm:
  Press the test button to check if it’s working. You’ll hear a loud beep that means it’s ready to keep you safe.
• Regular Care:
  Wipe the detector with a soft cloth to keep it clean. If it uses batteries, check them from time to time and replace them when needed.
• If the Alarm Goes Off:
  If smoke, heat, fire, or gas is detected, the alarm will sound right away. Stay calm, follow your safety plan, leave the area, call for help, and don’t again go back inside. It’s safe.

Pros

• Faster Fire Alerts
  It spots fire signs early by checking for smoke, heat, flames, and gases all at once.
• Fewer False Alarms
  It’s smart enough to know the difference between real danger and harmless smoke from cooking or steam.
• One Device, Full Safety
  You don’t need separate smoke, gas, or heat detectors; this one does it all.
• Saves Energy
  It runs on low power, so batteries last longer, and it uses less electricity.
• Simple to Use
  Easy to install, test, and take care of, even if you’re using it for the first time.
• Quiet and Neat
  Works silently and looks good in any room — home, office, or anywhere else.
• Good for All Places
  Perfect for houses, offices, shops, warehouses — any kind of building.

Cons

A Bit More Expensive
It costs more than basic smoke detectors because it has smart features.

Might Need a Pro (Sometimes)
In big buildings or complicated setups, a professional may need to install it.

Battery Needs Checking
If it runs on batteries, you’ll need to check and replace them now and then.

Can Be Too Sensitive in Some Areas
In places like kitchens or factories, it might go off too often if not placed properly.

Other Avenger Products.

Looking For a Criteria Detector in Pakistan. Universal Fire Protection provides multi-criteria detectors in Pakistan, Lahore, Karachi, and Islamabad

In addition, it is very easy to install and convenient to use. However, if you are unable to install it yourself, don’t worry. Universal Fire Protection is ready to provide you with the best service, supported by trained and professional staff, available 24/7. Furthermore, the device features a photoelectric sensor that enables early smoke detection from all directions, ensuring timely alerts and improved safety for everyone.

How do smoke Detectors work?

Types Of Smoke Detectors:

Specifications:

Alarm volume: 10 feet to 85 dB
Round Size: R = 102mm, H = 31mm
Powered by 9V battery (Not Included)
Usage: Fire, Smoke
Model Number: Family Guard
Is customized: no

How to get a Smoke detector Price in Pakistan?

Universal Fire Protection is best to provide Fire Fighting Equipment like Fire alarm system, Fire Extinguisher, Fire Ball, Fire Extinguisher, and Smoke Detector in Pakistan, i.e, Lahore, Karachi, Islamabad, and Rawalpindi. UFP is the leading professional with over 30 years of experience in the firefighting field. In order to know the price of a smoke detector in Pakistan or Lahore, or Karachi, you need to put a little effort in the form of our nearest office or make a call at 051-4427778. Also, you can send an email 24/7 at info@universalfireprotection.com.pk. We appreciate your effort and will give you a competitive and professional service.

Looking For Addressable Combination Detector (Heat & Smoke) in Pakistan. Universal Fire Protection Provide Combination Detectors at a very low price in Pakistan,